From 9a7ef1827fd4bd79e4a1103ca1220ecb146f522f Mon Sep 17 00:00:00 2001
From: Dante Catalfamo
Date: Wed, 8 Jul 2020 12:25:30 -0400
Subject: Put dnf command on new line

---
 content/posts/installing-openbsd-on-pcengines/index.org | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'content/posts/installing-openbsd-on-pcengines')

diff --git a/content/posts/installing-openbsd-on-pcengines/index.org b/content/posts/installing-openbsd-on-pcengines/index.org
index b04bf9c..96641f3 100644
--- a/content/posts/installing-openbsd-on-pcengines/index.org
+++ b/content/posts/installing-openbsd-on-pcengines/index.org
@@ -47,8 +47,13 @@ that I inserted the drive into the USB port on the APU2.
 
 I then plugged one end of the DB9F end of the serial adapter into the
 APU2, and the USB end into my PC. My desktop runs Fedora, so I had to
-install the =cu= utility using =sudo dnf install cu=. I then dialed it
-up using the serial adapter with the command
+install the =cu= utility using
+
+#+BEGIN_SRC shell
+sudo dnf install cu
+#+END_SRC
+
+I then dialed it up using the serial adapter with the command
 
 #+BEGIN_SRC shell
 sudo cu -s 115200 -l /dev/ttyUSB0
-- 
cgit v1.2.3