fedora-second-drive: Create and publish new post

7 files changed, 206 insertions, 0 deletions

diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/cover.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/cover.png
new file mode 100644
index 0000000..cc898d9
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/cover.png
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/decrypted device.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/decrypted device.png
new file mode 100644
index 0000000..c79e493
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/decrypted device.png
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk gpt.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk gpt.png
new file mode 100644
index 0000000..76fd2e9
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk gpt.png
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk.png
new file mode 100644
index 0000000..33445a8
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/format disk.png
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/hardware uuid.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/hardware uuid.png
new file mode 100644
index 0000000..f02e0c5
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/hardware uuid.png
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/index.org b/content/posts/adding-a-second-encrypted-drive-to-fedora/index.org
new file mode 100644
index 0000000..7fd0200
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/index.org
@@ -0,0 +1,206 @@
+#+TITLE: Adding a Second Encrypted Drive to Fedora
+#+DATE: 2024-01-14T00:20:01-05:00
+#+DRAFT: true
+#+DESCRIPTION:
+#+TAGS[]: fedora, encryption, storage
+#+KEYWORDS[]: fedora, encryption, storage
+#+SLUG:
+#+SUMMARY:
+
+#+ATTR_HTML: :title Fedora with two hard drives
+#+ATTR_HTML: :alt The Fedora logo one hard drive on either side
+[[file:cover.png]]
+
+This post will cover creating a second encrypted drive on Fedora that
+automatically decrypts on boot and mounts to a set location.
+
+I had finally run out of room on my SSD. I went to the store to buy
+another so I could increase the amount of storage space in my PC. I
+got home and installed it. Then I thought.
+
+My main drive in encrypted and setup by the Fedora installer, so my
+second should be too right? It only makes sense. Why have some data
+encrypted and the rest out in the open.
+
+When setting up the second drive, we're going to try to closely copy
+what Fedora does by default when it creates an encrypted drive. It
+also gives us a lot of flexibility as you'll see soon.
+
+What we're going to setup is called a LVM-on-LUKS configuration. LUKS
+is the Linux Unified Key Setup, the standard way Linux installations
+encrypt drives. LVM is the Linux Logical Volume Manager. This lets us
+create logical "devices" that we can place on top of the encrypted
+drive and partition as we please, without having to re-partition the
+hardware. By placing LVM on top of LUKS, our drive will just look like
+a single encrypted partition from the outside, but once unlocked, can
+contain many partitions. Even if we only want to create a single
+partition right now, this is a one-time setup that gives us the
+flexibility to partition the drive as we like in the future without
+having to setup the encryption again.
+
+To start the new SSD is completely blank, so we're going to have to
+give it a GPT partition table. This can be done in the gnome Disks
+utility by clicking on the drive, then clicking the three dots in the
+top corner, and then "Format Disk". After that you'll want to choose
+the GPT partitioning system.
+
+#+ATTR_HTML: :title Formatting the disk
+#+ATTR_HTML: :alt clicking the format disk button in gnome disks
+[[file:format disk.png]]
+
+#+ATTR_HTML: :title Creating a new partition table
+#+ATTR_HTML: :alt creating a new partition table in gnome disks
+[[file:format disk gpt.png]]
+
+Now we're going to create the encrypted LUKS layer. This can be done
+in Disks as well. We're going to click on the + icon to create a new
+partition. It should use all the space by default, click next. We're
+then going to give the volume a name and select the Ext4 option and
+check the LUKS box, click next.
+
+#+ATTR_HTML: :title Selecting the partition type of ext4 + luks
+#+ATTR_HTML: :alt Selecting the partition type of ext4 + luks in gnome disks
+[[file:partition type.png]]
+
+This is important, _*give the new drive the same password as your boot
+drive*_. This will let you unlock both at the same time at boot. Click
+create.
+
+To get our system to decrypt this drive on boot, we're going to have
+to add it to the [[https://www.freedesktop.org/software/systemd/man/latest/crypttab.html][=/etc/crypttab=]] file. This file contains a list of
+encrypted drives to setup that need to be setup during the boot
+process.
+
+There should already be a line in there for our existing boot drive.
+We want to add a similar line for our new device. To create the new
+entry we need two pieces of information from Gnome Disks. We need the
+hardware partition UUID, and the name of the decrypted partition.
+
+To get the hardware partition UUID, click on the upper layer of the
+partition in the device view. The UUID should be in the details in the
+underneath. To get the name of the decrypted partition, click on the
+lower half. In my case, the name of the encrypted partition is
+=/dev/mapper/luks-<UUID of the disk>=. We're interested in only the
+part that follows =/dev/mapper/=.
+
+We then add the new line to our =/etc/crypttab= file. It should look
+like this, ignoring the arrow and comment that follows it.
+
+#+begin_src
+luks-XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX none discard <- Our original boot drive
+luks-YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY UUID=YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY none discard <- Our new drive
+#+end_src
+
+The beginning of the line is the name of the decrypted partition,
+followed by =UUID=<hardware uuid>=, the hardware partition UUID. The
+word =none= tells LUKS that we are not using a keyfile. The word
+=discard= here is a mount option that improves the efficiency of SSDs,
+it's meaning is covered in the =crypttab= man page.
+
+Now that our encryption is taken care of, we need to setup the
+partitions.
+
+LVM is split up into three layers. The physical volume layer, the
+volume group layer, and the logical volume layer.
+
+The physical layer represents actual hardware drives. The volume group
+layer represents a "pool" of one or more drives that we can carve up
+however we please, creating volumes out of the total available space
+as though it's a single drive. The logical volume layer is made of the
+new virtual devices that the OS sees after we've divided the volume
+group layer.
+
+LVM is setup like this because it lets you create [[https://en.wikipedia.org/wiki/RAID][RAID]] configurations
+and logical partitions that span multiple physical disks. We aren't
+interested in all of these features right now, but we must go through
+the process all the same.
+
+First we need to create a physical volume from the decrypted LUKS
+partition. We use the =pvcreate= command alone with the LUKS partition
+device file from Gnome Disks.
+
+#+begin_src
+sudo pvcreate /dev/mapper/luks-YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY
+#+end_src
+
+If it asks you about overwriting an ext4 partition, that is okay.
+Gnome Disks created an ext4 partition that we are going to overwrite.
+Just be sure it's the correct drive before confirming.
+
+Next we're going to create a volume group from that physical volume.
+We use the =vgcreate= command for that. We need to come up with a name
+to represent this "pool", I just use =data_drive=.
+
+#+begin_src
+sudo vgcreate data_drive /dev/mapper/luks-YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY
+#+end_src
+
+Finally we need to create the logical volume that we're going to be
+formatting with ext4. In my case I only want a single partition at the
+moment, but may decide to shrink the partition and split it up
+differently in the future. Since I only want a single partition for
+now I'll use 100% of the available space. We create logical volumes
+using the =lvcreate= command.
+
+#+begin_src
+sudo lvcreate -l 100%FREE data_drive -n data
+#+end_src
+
+The name of this logical volume is =data=.
+
+The [[https://wiki.archlinux.org/title/dm-crypt/Encrypting_an_entire_system#LVM_on_LUKS][arch wiki]] also suggested that you leave at least 256M of extra
+space so you can run =e2scrub= to in case you want to check the
+filesystem metadata.
+
+#+begin_src
+sudo lvreduce -L -256M data_drive/data
+#+end_src
+
+Our logical volumes can be resized and the underlying storage used to
+create new logical volumes at any time in the future using the =lv*=
+commands.
+
+Our new logical volume should now be available at either
+=/dev/data_drive/data= or =/dev/mapper/data_drive-data= and ready for
+partitioning.
+
+If you want to see what the LVM volumes look like, you can inspect
+them using =pvs= and =pvdisplay= for the physical volumes, =vgs= and
+=vgdisplay= for the volume groups, and =lvs= and =lvdisplay= for the
+logical volumes.
+
+Now we'll create our ext4 partition.
+
+#+begin_src
+sudo mkfs.ext4 /dev/data_drive/data
+#+end_src
+
+At this point the new logical volume is prepared and ready to be mounted.
+
+For this I chose the location =/mnt/data=, but you can mount the drive
+wherever you deem appropriate.
+
+#+begin_src
+sudo mkdir /mnt/data
+sudo mount /dev/data_drive/data /mnt/data
+#+end_src
+
+If we want to make sure the system automatically mounts the drive at
+boot, we can add it to our =/etc/fstab=.
+
+We can add the following line to the bottom of the =/etc/fstab= file.
+
+#+begin_src
+/dev/mapper/data_drive-data   /mnt/data   ext4   defaults,x-systemd.device-timeout=0 1 2
+#+end_src
+
+The first column is the name of the device we want to mount. The
+second column is the location we want to mount it. The third column is
+the filesystem on that device. The fourth column is contains the mount
+options we want to use, and the fifth and sixth columns are the dump
+and fsck order. You can read about what they do in the =fstab= man
+page.
+
+Now everything should be setup and ready! The drive should unlock when
+you type your password at boot and automatically mounted to the
+correct location.
diff --git a/content/posts/adding-a-second-encrypted-drive-to-fedora/partition type.png b/content/posts/adding-a-second-encrypted-drive-to-fedora/partition type.png
new file mode 100644
index 0000000..8346185
--- /dev/null
+++ b/content/posts/adding-a-second-encrypted-drive-to-fedora/partition type.png